ENGLISH
2
INSTRUCTIONS FOR USE
Before use, make sure hair is clean, dry and tangle-free.
Plug in the unit, press and hold the on-off button for two seconds to switch on. Press again
for two seconds to switch off.
Rotate the variable wheel to increase the desired temperature. The LED will stop flashing
when desired temperarture is reached.
For extra protection and best results, section hair prior to straightening and spray with
heat protection spray. Always straighten the lower layers first.
Run the straightener through the entire length of the hair, without stopping. Use a comb
whilst straightening for even straighter results.
Repeat only twice per section to prevent hair damage.
IMPORTANT INSTRUCTIONS
Due to the extreme heat capabilities of this styler, extra care should be taken when
using.
While heating, during use and cooling, place on flat, smooth, heat-resistant surface. Only
hold unit at the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
CLEANING AND MAINTENANCE
Ensure the unit is unplugged and cool. Wipe clean any build up of styling products with a
damp cloth. Do not use an abrasive cleaning fluid to clean, as damage will occur.
090166 REM IFU S1005 UK.indd GB_2
090166 REM IFU S1005 UK.indd GB_2
18.03.2009 20:26:10 Uhr
18.03.2009 20:26:10 Uhr
