![background image](http://html1.mh-extra.com/html/remington/remj100/remj100_owners-manual_1438387011.webp)
11
102961
Fuel Filter
(REMJ150)
1. Remove side cover screws
using 5/16" nut-driver.
2. Remove side cover.
3. Pull upper fuel line off fuel
filter neck.
4. Carefully pry bushing,
lower fuel line, and fuel
filter out of fuel tank.
5. Wash fuel filter with clean
fuel and replace in tank.
6. Attach upper fuel line to
fuel filter neck.
7. Replace side cover.
Figure 10 - Fuel Filter Removal (REMJ150)
Spark Plug
1. Remove upper shell (see
page 10).
2. Remove fan (see page 15).
3. Remove spark plug wire
from spark plug.
4. Remove spark plug from
burner head using 13/16"
open-end wrench.
5. Clean and regap spark plug
electrodes as follows:
REMJ70: .085" (2.2 mm) gap,
REMJ150: .085" (2.2 mm) gap.
6. Install spark plug in burner
head.
7. Attach spark plug wire to
spark plug.
8. Replace fan (see page 15).
9. Replace fan guard and
upper shell.
SPARK PLUG REMOVAL 70, 100 &150
PFA/P 031A
Figure 11 - Spark Plug Removal
Burner
Head
Spark
Plug
Figure 12 - Spark Plug Gap
Bend Here
to Adjust
Gap
Gap
Spark Plug Wire
and Rubber Cap
Side Cover
Fuel Filter, Bushing,
and Lower Fuel Line
Upper
Fuel Line