![background image](http://html.mh-extra.com/html/remington/rapid-cut-turbo-hc4300au/rapid-cut-turbo-hc4300au_use-and-care-manual_1437908006.webp)
CLEANING AND MAINTENANCE
•
To ensure long lasting performance of your hair clipper, clean the
blades and unit regularly.
•
Always keep the hair clipper in the provided storage pouch to avoid
damage to the blades.
•
Ensure the appliance is switched off and unplugged from the mains
before cleaning.
•
Do not use harsh or corrosive cleaners on the unit or blades.
•
Cleaning should be done with the cleaning brush provided.
•
After each use - brush the accumulated hair from the blades.
WASHABLE CLEANING
•
The Rapid Cut Turbo Hair Clipper is fully washable for easy cleaning,
the entire clipper may be held under running water.
•
It is recommended that you rinse the hair off the blades after each
use. For best results, keep the clipper running while running it under
the tap.
•
Ensure the clipper is dry after cleaning.
•
For more thorough cleaning, the blade set can be easily removed
to wash any hair trimmings from the blades. To release the blade
set, push the removable blade cartridge outward and away from the
clipper by pushing on the thumb pad.
•
Ensure the blades are dry after rinsing under the tap. To reattach,
align the blade set onto the clipper and push the blade set towards the
clipper body until it clicks into place.
•
Place a small drop of cutter or sewing machine oil onto the blades at
each end and at the middle point of the blades. Turn the unit on for
a few seconds to distribute the oil then turn off and wipe off excess oil.
NOTE: Keep the blades lubricated after contact with water.
WARNING: DETACH THE HAND-HELD PART FROM THE
SUPPLY CORD BEFORE CLEANING IT IN WATER.
6