6
B
Travel Lock:
To engage the travel lock, press and hold the On/Off button
for 5 seconds. The bottom and top LED will flash for 5 seconds. While the
travel lock is set, if the On/Off button is pressed, the bottom and top LED
will flash for 5 seconds to indicate the shaver is in travel lock mode. To
deactivate the travel lock, press and hold the On/Off button for 5 seconds.
The bottom and top LED will flash for 5 seconds and the shaver will turn
on.
Note: Some countries will require the use of a plug adaptor that is not
included with your shaver.
CHARGING
Before using, read the important safety instructions in this manual.
1.
Ensure the product is switched off. Connect the shaver to the adaptor
2.
Connect to the mains and charge for 1.5 hours when using for the first
time. This first charge is important to the shaver’s battery life.
3.
When plugged, the LEDs will successively light up.
4.
When empty, the battery should be charged for 1.5 hours, and will
provide 60 minutes of shaving time.
5.
To preserve the life of the batteries, allow them to fully discharge
every six months, and then recharge them for 1.5 hours.
Caution:
•
Make sure the shaver and your hands are dry when charging the
shaver.
•
Always charge the shaver in a cool, dry place.
SHAVING
1.
Press power button to turn on. (Diagram A)
2.
Shave face and neck using short, circular strokes. (Diagram B)
3.
After shaving, turn the shaver off. (Diagram A)
A
B
Summary of Contents for QUICK SHAVE PRO TURBO
Page 9: ......
