Remington ProPower HC5200, User Manual

Page: 4 / 128

4
ENGLISH
C
GETTING STARTED
,
CHARGING YOUR HAIRCLIPPER
• Turn the appliance off.
• Connect the charging adaptor to the product and then to the mains.
• If the product is not going to be used for an extended period time (2 – 3
months), unplug it from the mains and store.
• Fully recharge your product when you would like to use it again.
• Allow 16 – 20 hours for a full charge.
• This appliance should be charged by approved safety isolating adaptors
PA-3215E (for EU version) or PA-3215U (for UK version) with the output capacity
of 3.2V dc; 1500mA .
, CORDED USE
• Connect the charging adaptor to the product then to the mains.
F
CAUTION:
Extended mains only use will result in the reduction of the battery
life.
Keep the appliance dry.
, CORDLESS USE
When the unit is switched on and fully charged, the product can be used in
cordless mode for up to 40 minutes.
F
INSTRUCTIONS FOR USE
, BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
Comb position Short comb Long comb
1 3 mm 24 mm
2 6 mm 27 mm
3 9 mm 30 mm
4 12 mm 33 mm
5 15 mm 36 mm
6 18 mm 39 mm
7 21 mm 42 mm