5
2. To remove, slide the accessory release button (
5
) backwards and remove the
accessory.
Prepare the hair for styling
•
Wash and condition the hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Using the pre-styling nozzle rough dry the length and roots until 80% dry.
•
Divide the hair into sections, style the lower layers first.
1. Plug your air styler into the mains power supply.
2. Press the
C
button to switch on.
StyleAdapt™ Mode
•
StyleAdapt™ mode can only be selected if either of the two brushes are fitted. It is
disabled if the root boost attachment is fitted.
1. When first switched on your air styler will be in StyleAdapt™ mode.
2. Select the desired air speed using the speed selector (
F
) button. The air speed LED
indicators will show the selected air speed:
Air speed LED indicators
Speed
l
Low speed
l l
Medium speed
l l l
High speed
3. During styling, the StyleAdapt™ indicator will spin (fig. C) indicating that your air
styler is learning about your hair and adjusting the air temperature to a heat that is
personalised to you. The temperature changes are not shown on the display but
happen quickly and automatically during styling.
Manual Mode
1. To override the StyleAdapt™ mode and use as a standard air styler, press the
K
button until the StyleAdapt™ indicator goes off.
•
Note that in manual mode, your air styler will no longer be learning about your hair
and adapting the heat.
2. Select the desired heat and speed setting using the speed selector (
F
) button. The
air speed LED indicators will show the selected setting:
Air speed LED indicators
Setting
l
Low speed/low heat
l l
Medium speed/medium heat
l l l
High speed/high heat
