![background image](http://html.mh-extra.com/html/remington/precisioncut-hc5302/precisioncut-hc5302_user-manual_1437899006.webp)
6
,
STEP 1 – Nape of the neck
•
Set the comb to 3mm or 6mm.
•
Hold the clipper with the blade teeth pointing upwards. Begin starting at
the centre of the head at the base of the neck.
•
Slowly lift the clipper, working upwards and outwards through the hair,
trimming just a little at a time.
,
STEP 2 – Back of the head
•
With the comb set at 12mm or 18mm, cut the hair at the back of the head.
,
STEP 3 – Side of the head
•
With the comb set at 3mm or 6mm, trim sideburns. Then change to the
longer 9mm guide comb and continue to cut the top of the head.
,
STEP 4 – Top of the head
•
Use the longer length comb attachment and set it to 24mm or 27mm then
cut hair on top of the head against the direction in which the hair normally
grows.
•
For longer hair on top, use the longer length comb attachment (24 – 44mm)
to achieve the desired style.
•
Always work from the back of the head.
,
STEP 5 – The finishing touches
•
Use the clipper without an attachment comb for close trimming around the
base and sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper.
•
Place the reversed clipper at right angles to the head, tips of the blades
lightly touching the skin and then work downwards.
C
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and unit
regularly.
•
Always keep the attachment guide comb on the trimmer blade.
,
AFTER EACH USE
•
Ensure the appliance is switched off and unplugged from the mains before
cleaning.
•
Brush the accumulated hair from the blades. Do not submerge the clipper in
water.
ENGLISH
Summary of Contents for PrecisionCut HC5302
Page 1: ...HC5302 PrecisionCut Hair Clipper and Nose and Ear Trimmer ...
Page 207: ...207 ...
Page 208: ...208 ...
Page 209: ...209 ...