6
,
CLEANING CAUTIONS
•
Ensure the appliance is switched off and unplugged from the mains before
cleaning.
•
Open the shaver head by pressing the release button on the front of the
shaver (Fig. A) and flipping open the head away from the body of the shaver
(Fig. B).
•
Hold the cutter assembly so that the blue cutter is facing towards you. Slide
the inner cutter carrier away from the blue cutter to release it from the
assembly (Fig. C).
•
Pull the inner cutter carrier away from the inner cutters (Fig. D).
•
Thoroughly brush hairs from the inner and outer cutters. Rinse out
remaining debris (Fig. E).
•
Place the inner cutter carrier back into position and lock into place (Fig. F-G).
•
Align the spring hinge into the slot at the back of the hair pocket and press
into place. Snap the head assembly closed.
,
WARNING:
Detatch the hand-held part from the supply cord before cleaning in water.
Shaver heads suitable for cleaning under an open water tap.
,
CAUTION
•
Do not submerge in water as damage will occur.
•
Shaver heads can be rinsed with water. The water temperature should not
exceed 70 degrees. Unplug the shaver before cleaning with water.
•
Keep the adaptor and cable dry.
,
CLEANING TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
,
DANGER: Once the shaver has been dismantled for disposal, do not attempt
to reassemble and/or use.
•
Unplug the shaver.
•
Remove the head from the shaver (Press release button and pull head
straight away from the shaver body).
•
Using a small screwdriver, pry front cover from the shaver.
•
Remove the 4 screws located on the front of the shaver. (Fig. H)
