![background image](http://html1.mh-extra.com/html/remington/pr1250/pr1250_user-manual_1437517004.webp)
4
C
GETTING STARTED
It is recommended that you use your new shaver daily for up to four weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.
To confirm the model number of your shaver, please refer to the packaging or
the open the trimmer where the model is printed in the upper right corner of the
rating information.
,
CHARGING YOUR SHAVER
1
Ensure the appliance is turned off.
2
Connect the shaver to the adaptor and then to the mains.
3
Press the power switch to turn the product on.
4
Charge for at least 24 hours when using for the first time.
5
Allow 4 hours for a full charge generally.
6
When charging, the green indicator light will show (PR1250) or slowly flash
(PR1270). When fully charged, the green indicator light will turn off (PR1250)
or the green indictor light will show for 5 minutes and then turn off (PR1270).
7
To preserve the life of your batteries, let them run out every 6 months then
recharge for 24 hours.
8
The shaver automatically adjusts to a mains voltage between 100V and
240V.
F
INSTRUCTIONS FOR USE
,
SHAVING
,
Note: PR1250 can only be used cordless. PR1270 can be used either with the
cord attached or cordless.
1
Make sure your shaver is properly charged.
2
Switch the shaver on.
3
Stretch the skin with your free hand so the hairs stand upright.
4
Only apply light pressure on the shaving head while shaving (pressing too
hard can damage the heads and make them vulnerable to breakage).
5
Use short, circular strokes.
,
TRIMMING
6
Slide the trimmer button to release the detail trimmer.
7
Hold the trimmer at a right angle to your skin.