Remington Power R2000AU, Use & Care Manual

Page: 5 / 14

5
ABOUT YOUR SHAVER
R2000AU SPECIFICATIONS
Power System Corded
Voltage Type Worldwide
Replacement Head & Cutters SP-4141AH
Voltage Type: Worldwide Voltage - shaver automotically adapts to an outlet
voltage between 100V and 240V
Note: Some countries will require the use of a plug adaptor that is not
included with your shaver.
SHAVING
Firmly insert the power cord into the power plug at the base of the
shaver. When doing this for the first time the plugs may be tight at the pin
connection points, proceed to insert the plug firmly until it is in place and
will not disconnect when gently tugged.
1. Switch the On/Off button to activate for shaving (Diagram A).
2. Hold the shaver so that all the heads touch your face together
(Diagram B). This allows the shaver to work the way it was designed
for the closest shave and minimum wear. Avoid holding the shaver at
an angle so that only one head touches the skin. Use short, circular
stokes. Use your free hand to stretch your skin. This encourages your
whiskers to stand out, making it easier for them to enter the cutting
chamber. Never press hard when shaving. Pressing hard only flattens
the whiskers, which makes it harder for them to enter the cutting
chamber. It will also cause the cutting surface to wear out more
quickly.
3.
Switch the On/Off button to turn the shaver off (Diagram A).
SHAVING TIPS
• Wait at least 15 minutes after getting up before shaving, to ensure
your face is free of puffiness that may be present from sleeping.
A B A B