![background image](http://html1.mh-extra.com/html/remington/pg6020/pg6020_manual_1437481004.webp)
4
PARTS
1. On/off switch
2. Groomer
3. Wide trimmer
4. Precision trimmer
5. Mini foil shaver
6. Nose, ear, eyebrow trimmer
7. Attachment guide combs
8. Charging indicator
9. Stand
• Adaptor (not shown)
GETTING STARTED
CHARGING YOUR APPLIANCE
•
Before using your groomer for the first time, charge for 14-16 hours.
•
Ensure the product is switched off.
•
Place your groomer into the stand, connect the adaptor to the product and then to
the mains.
•
The charging indicator will illuminate.
•
The charging indicator will remain illuminated once fully charged.
•
Your appliance cannot be overcharged. However, if the product is not going to be
used for an extended period of time (2-3 months), unplug it from the mains and
store.
•
Fully recharge your appliance for 16 hours when you would like to use it again.
•
To preserve the life of your batteries, let them run out every 6 months then recharge
for 14-16 hours.
INSTRUCTIONS FOR USE
ATTACHING AND REMOVING GUIDE COMBS
To attach:
With the trimmer blade facing away from you, slide the guide comb on top of the
trimmer blade and click into position.
To remove:
With the trimmer blade facing away from you, carefully push the guide comb away from
the trimmer blade.
BEFORE YOU BEGIN
•
Comb facial hair with a fine comb before you start trimming.
•
Hairs should be dry and without any waxes or lotions before using the groomer.
TO THIN AND TAPER THE BEARD/MOUSTACHE
•
Attach the wide trimmer blade.
•
Place the hair length attachment on the trimmer blade, select the desired length
and switch on.