![background image](http://html1.mh-extra.com/html/remington/pf7500au/pf7500au_use-and-care-manual_1437466011.webp)
REPLACING THE FOIL & CUTTERS
It is very important to replace the foil and cutters when necessary to ensure a close,
comfortable shave without irritation. We recommend they be replaced every 6 months.
Here are some signs of head and cutter wear, indicating that replacement is needed:
•
Irritation: As the heads get excessively worn you may experience some skin
irritation. This would be especially noticeable when you apply moisturizing lotion.
•
Pulling: When the cutters wear you may feel a sense of pulling and a loss of
closeness when you shave. This is an indication that it is time to replace your
heads and cutters.
Replacement foil & cutters may be obtained from your local retailer, or directly from
Remington
®
. Simply fill out the enclosed accessory order form - refer to page 8 & 9, or
alternatively your order can be processed over the phone via the Remington
®
Service
Hotline - refer to page 14.
HOW TO REPLACE THE FOIL & CUTTERS
Remove the foil assembly by grasping the front and back of the foil assembly and lift
upwards to remove from the hair pocket.
•
Grasp each cutter between your thumb and forefinger and pull upwards to remove.
•
Snap each new cutter assemblies into the top of the drive shaft.
NOTE: Do not push on the ends of the cutters as this may cause damage and
reduce their effectiveness.
•
Insert the new foil assembly on top of the hair pocket, press down and click into
place.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
This product conforms to radio frequency interference requirements
Any product purchased and used commercially carries a limited 90 Day Warranty.
11
Summary of Contents for PF7500AU
Page 8: ......