INSERTING THE BATTERY
Your Remington
®
Lithium Powered Washable nose & ear trimmer runs on one Lithium
Powered “AA” ALKALINE battery, which is included in your pack.
1. To open the battery compartment, turn the base of the unit approximately
1cm counter-clockwise (to the left) and pull it off.
2. Insert the battery into the unit, positive end first.
3. Replace the base and turn it 1cm clockwise (to the right) to lock it into place.
Battery cautions
t
Using non-alkaline batteries will impair the unit’s operating performance.
t
The battery should not be left in the unit if it is not in use for long periods.
t
To prevent battery corrosion, the unit should be stored in a dry environment.
t
Dead
batteries
should
be
removed immediately and disposed of properly.
t
Do not use rechargeable batteries with this appliance. The lower voltage in
rechargeable batteries impairs the performance of the cutting unit.
HOW TO USE
Changing the Attachment Heads
This model comes with interchangeable attachments. You may want to use the
rotary head to trim nose hairs and ear, the linear head for eyebrow trimming, and
the sideburn trimmer for detailing sideburns.
To change heads:
1. Turn the trimmer off.
2. Detach the cutting head by turning it counter-clockwise to the unlocked
position and pulling it off.
3. Once the previous head is removed, attach the other head by placing it on
top of the unit and turning it clockwise to the locked position.
Turning on your trimmer:
The on/off switch is integrated into the battery cap.
1. Rotate the battery cap clockwise to turn on.
2. To turn off, simply rotate the battery cap, counter-clockwise, back to the off
position.
NOTE:
Always remember to turn on the trimmer before you insert it into your
nose or ear to avoid painfully snagging hairs.
4
t
Batteries that are not Lithium Ion can be used with your trimmer, though the
battery life will provide less run time when compared to Lithium Ion batteries.
