![background image](http://html.mh-extra.com/html/remington/microflex-extra-r-835/microflex-extra-r-835_use-and-care-manual_1437396002.webp)
Tips For Use
• Clean your shaver frequently.
• Always keep the protective headquard on the cutter head and keep
the trimmer in the “of f” position when the shaver is not in use.
• Before using,make sure that the cutter head assembly is in locked
position.
• Wait at least 15 minutes after getting up before shaving.
• Thoroughly cleanse and dry skin prior to shaving.
• Your R-850 cord/cordless shaver should not be used strictly as
a cord-operated shaver, as continued cord only use will result in
reduction of battery life.
Operation Instructions
The MicroFlex
™
shaver needs no adjustments to the heads or cutters
before you shave.The floating heads will automatically adjust to the
contours of your face.It is not necessary to apply pressure while shav-
ing...let the shaver glide lightly on your skin.This gentle touch makes
shaving easier and helps avoid possible skin irritation.
Getting Used To Your Shaver
As with every shaver, your shaver will improve over time. So
allow about three weeks to develop an effective shaving style
and for your skin to adjust to the new shaver. The adaptation
period may take a little longer if your skin is sensitive,if you
are switching from a different way of shaving,or it your alter-
nate between shaving methods.
To Shave
Push the on/off button locking bar
inward and push upward on the on/off
button to actuate the shaver for shav-
ing.(Locking bar on rechargeable
models only.)
To Trim
To use the Easy-View
™
pop-up trimmer,
simply push the trimmer button up.The
trimmer will pop-up for use.Hold the
shaver as shown in the illustration. To
conserve battery energy (on recharge -
able shavers only),it is recommended to use the trimmer only
when needed for trimming.When through using,push the
trimmer button downward to lock into the off position.
Trim Sideburns
Simply touch the comb-edge of the
trimmer to the desired line for neat,
clean sideburns.
Trim mustache
Hold shaver at desired trim line for a
quick easy, professional trim.The trim-
mer can also be used to trim the upper
edge of your moustache.
Shaving Tips and Instructions
For a smoother, more comfortable,moisture free shave,use
a Remington
®
Pre-Shave Powder Stick.For those who prefer
a liquid,use the non-greasy Remington
®
Pre Shave Lotion,
specially formulated with a unique suspended powder and
aloe for extra conditioning and protection.
Cleaning Your Shaver
TO ASSURE SMOOTH, EFFICIENT PERFORMANCE,
IT IS IMPORTANT TO CLEAN YOUR SHAVER.
Cleaning your Remington
®
MicroFlex
™
Shaver is easy.
Simply pull the head assembly out from the shaver by
placing fingers on rib areas of head assembly. Using
the brush supplied,clean the internal part of the head
assembly and the hair pocket area,
where 3 shaver spindles are located.
“At Least Once A Week”.
For more complete cleaning,remove
the cutter retainer assembly from the
head assembly by unscrewing the
center screw knob and clean with
brush.After cleaning put the cutters
back in position.Place the cutter retainer back into
position. Important! Make sure to align the two locat-
ing holes in the Cutter Retainer assembly with the
pins in the Head Frame Assembly.(See below).Then
tighten centerscrew knob to lock cutters into place.
Put head assembly onto the shaver
simply by pushing in onto the
shaver. Replace the plastic head-
guard after cleaning.When remov-
ing the headguard or placing it
back onto the shaver, do not apply
pressure to floating cutter surface
as you may damage them.
Never
clean the shaver or replace the
cutters while it is plugged into electrical outlet.
Cutter Retainer
Assembly
Center
Screw
Knob
Head/Frame
Assembly
Floating
Cutter
Heads
Locating Pins
Locating Holes