![background image](http://html1.mh-extra.com/html/remington/mb4850au/mb4850au_use-and-care-manual_1437373008.webp)
BATTERY REMOVAL
• Remove the blade cartridge from the trimmer.
• Remove the 4 screws from the back side of the trimmer body.
• Pry apart the two halves of the trimmer body to expose the internals.
• With the top half of the trimmer body removed and the internals facing upward, pull
the end of the charge port upward to release the battery enclosure.
• Cut the red and black wires which lead into the battery enclosure
• Pry up the small plastic plate on the end of the battery enclosure that the red and
black wires lead into and move it out of the way
• Remove the 2 screws from the end of the battery enclosure
• Pry off the battery enclosure end cap
• Pull firmly on what remains of the red and black wires to remove the batteries and
circuit board from the battery enclosure
• Firmly pull the individual batteries away from the circuit board to remove them from
the circuit board and better expose the red and black battery leads.
• Cut the remaining red and black battery leads to fully disconnect the batteries
• Dispose of the batteries safely and responsibly according to your state and local
regulations and to the warnings section of this instruction book.
Suitable for cleaning under an open tap.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
8