Remington iLIGHT Ultra, Use And Care Manual

Page: 31 / 108

31
5f.
Immediately after a flash is deliv-
ered, move the HAND PIECE to
a new treatment location while
keeping the FLASH BUTTON
pressed down. After 3 seconds the
CARTRIDGE STATUS INDICATOR
DISPLAY will turn on again
and the device will beep. If the
TREATMENT CAP is in full con-
tact with the skin and the FLASH
BUTTON is pressed down, another
flash will be delivered.
After a flash is delivered, lift the HAND
PIECE to the next area in a grid-format.
NOTE: If the button is kept depressed, the
HAND PIECE can be slid between spots.
Three seconds later, (assuming SKIN
CONTACT SENSORS are in contact
with skin), the device will once again
emit a "BEEP" to confirm that it is
ready to flash.
The device will operate if FLASH
BUTTON is pressed.
5g. Try to treat in an organized, grid-
like pattern to ensure you cover
all hairs in the intended treatment
area. WARNING: DO NOT flash
the Remington iLIGHT Ultra Face
& Body device on the same treat-
ment spot multiple times during
the same session, as this could
cause skin swelling, temporary
blisters, or could change the color
of your skin.
Using the Remington
®
iLIGHT
®
Ultra Face & Body Hair Removal System for Treatment