Remington iLIGHT Elite IPL7000, Use And Care Manual

Page: 19 / 40

19
Operating Instructions
Once you’ve become familiar with the
device and have read all the
WARNINGS ,
you’re ready to start using your iLIGHT
®
Elite Hair Removal System!
Each time you use the device, make
sure the Hand Piece, Flash Window, Skin
Contact Sensors, and Skin Tone Tester are
clean and free of debris. Clean the system
if necessary.
This section provides step-by-step
instructions on how to operate the device.
Read this entire section carefully before
you start treatments, and refer back
as needed.
STEP 1:
Clean, Shave and Dry Intended
Treatment Area
STEP 2:
Plug In and Turn On
Plug your device into an appropriate
power outlet. This device has a polarized
plug (one blade is wider than the other) as
a safety feature, and therefore will only fit
in a polarized outlet one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to
defeat this safety feature.
Press the purple blinking Power Button to
turn on the device.