12
ENGLISH
,
PREPARE THE i-LIGHT FOR USE
•
Unwrap the hand piece cord from the i-LIGHT base and rest the hand piece back on the base unit.
•
Ensure the power switch on the base unit is OFF.
•
Connect the power cord to the i-LIGHT base unit at the power inlet.
•
Connect the power cord to the wall outlet. Turn the power switch ON (fig. 5).
,
SELECTING THE ENERGY LEVEL
•
The i-LIGHT is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest
setting.
,
TIP: For the most effective results, always use the highest energy level that does not cause discomfort
on the skin.
•
To determine the energy level being used, observe the number of lights illuminated on the Energy
Level Display (fig. 6).
•
Your i-
LIGHT will automatically be set to Energy Level 1 each time the device is powered ON. To change
the level, press the Energy Level Selection Button.
,
TEST THE i-LIGHT ON YOUR SKIN
,
Before your first full treatment, test the i-LIGHT on a small patch of skin and wait 24 hours to
ensure there are no adverse reactions.
•
Start at energy level 1.
1
Place the i-LIGHT hand piece against your skin so the Flash Window is flush with the skin surface.
2
Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated
green (Fig. 7).
Fig. 5
Fig. 6
Summary of Contents for i-LIGHT IPL6750
Page 1: ...ENGLISH ENGLISH IPL6750 ...
Page 203: ...203 ...
