![background image](http://html1.mh-extra.com/html/remington/i-light-compact-control/i-light-compact-control_manual_1437746013.webp)
13
TROUBLESHOOTING
•
Always read these instructions fully before using i-LIGHT® Compact Control.
•
Refer to this troubleshooting guide if you experience any problems with
i-LIGHT® Compact Control, as this section addresses the most common
problems you could encounter. If you have followed the instructions in
this section and continue to experience problems, please contact the
Remington® Service Centre for further assistance.
My device does not start.
•
Make sure the adapter is properly connected to the device and that it is
plugged into an electrical outlet on the wall.
There is no light pulse when the device touches my skin.
•
Check that the device is connected and the ready light is on. Make sure
that the treatment window is evenly and firmly pressed to the skin and that
you are moving the device across your skin. It is also possible that your skin
colour is too dark.
The skin tone tester light and the ready light blink.
•
The skin colour is too dark.
One or more lights blink.
•
The device has malfunctioned.
The device has stopped working and is in standby mode.
•
Press the control button again to start the device.