![background image](http://html1.mh-extra.com/html/remington/hh-600t-kfa/hh-600t-kfa_users-manual-and-operating-instructions_1438367011.webp)
NOTE:
Use only original equipment replacement parts. Use of
alternate or third party components will void any warranty and
may cause unsafe operating conditions.
- Stop heater (See OPERATION, page 6).
- If accessory pressure gauge is being used, remove pressure
gauge.
- Replace pressure gauge, and plug in end of filter cover.
NOTE:
If heater does not ignite when heater is turned on, please
turn AIR VENT SCREW counter clockwise to release air, then
turn OPERATION SWITCH back on.
© 2014 Pinnacle Products International, Inc.
11
Kerosene User’s Manual
NEVER LEAVE HEATER
UNATTENDED WHILE BURN-
ING OR WHILE CONNECTED
TO A POWER SOURCE
Maintenance (Continued)
Pump Adjusting
Screw
Figure 14:
Pump Pressure Adjustment
Wiring Diagram
Figure 15:
Wiring Diagram for HH-600T-KFA