![background image](http://html1.mh-extra.com/html/remington/hc9005au/hc9005au_use-and-care-manual_1437776009.webp)
9
6.
Replace the blade set by inserting the notch (on the inside at the
bottom of the blade set) into the groove of the hair pocket and firmly
push down with the palm of your hand until you hear an audible ‘click’
and the blade set is locked into place.
Storage
When not in use, unplug the hair clipper and store it out of reach of children
in a safe dry place. Never wrap the cord around the hair clipper as this will
cause the cord to wear prematurely and break. Handle the cord carefully
for long life and avoid jerking, twisting or straining especially at the plug
connections.
TROUBLESHOOTING
The hair clipper does not work when turned on:
Hair clipper must be charged for a full 16 hours, or use hair clipper while
plugged into wall.
Hair clipper cutters do not move:
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section on page 8.
Hair clipper does not hold charge:
Fully discharge the battery by running hair clipper until it stops; then follow
recharging instructions in Charging Your Hair Clipper section on page 5.
We suggest you use local management centres to recycle this product at
end of life.
THIS PRODUCT IS NOT SUITABLE TO USE IN THE BATH OR SHOWER.
This product conforms to radio frequency interference requirements
Any product purchased and used commercially carries a limited 90 Day Warranty.