![background image](http://html.mh-extra.com/html/remington/hc7000au/hc7000au_use-and-care-manual_1437286006.webp)
6
SHAVING YOUR HEAD
1.
Hold the head shaver body in the palm of your hand. Press the On / Off
switch to turn the head shaver on.
2.
Press the five cutting heads against your scalp. It is not necessary
to press hard to shave. Pressing hard does not cut closer and could
increase irritation. The cutting head will flex to follow the contours of
your head.
3.
Move the shaver slowly around your head. You may use linear strokes,
or rotating motion, whichever you feel is most effective picking up and
cutting your hair.
4.
Use a hand held mirror to check the back of your head to confirm a
complete and thorough shave. You may also use your other hand to
feel for complete and consistent cutting.
5.
It is not recommended to use the head shaver for facial hair.
6.
When finished turn the shaver off. Check for the red low charge
indication.
SHAVING TIPS
•
Do not attempt to shave head hair that is longer than 4 days growth or
2.0 mm. The Ultimate Series Rx5 head shaver is intended to maintain
the shaved look and can be used daily or every two or three days.
•
The Ultimate Series Rx5 head shaver cannot shave long hair down to
the shaved length. If your hair is longer than 2.0 mm you should trim it
down with a hair clipper first before using the head shaver.
•
The Ultimate Series Rx5 head shaver can be used dry or it can be used
with shaving cream or gel in the shower.
TRIMMING
Pop-up Trimmer:
The pop-up trimmer is located at the back of the shaver handle. It can be
used for trimming edges of beards, sideburns or ears.
1.
To activate the trimmer, turn the shaver on. Slide down the release
button for the trimmer to pop the trimmer up.
2.
Use cutting strokes in the direction opposite of the trimmer’s spring
release.
3.
When finished press the trimmer down and snap it back into the
stored position.
Note: Lubricate teeth with oil every 6 months.
Summary of Contents for HC7000AU
Page 8: ......