![background image](http://html.mh-extra.com/html/remington/hc5960/hc5960_instructions-manual_1437873006.webp)
6
• Select the desired boost level by pressing the boost button with the 3
position slide switch in the middle position. The display will indicate the level.
• Once the desired length and boost level have been selected slide the 3
position slide switch to the last position (the furthest down) to lock the
cutting length and turn the motor on.
• Note: Adjustments to length and boost can be done anytime the 3 position
slide switch is set to the middle position. Adjust the cutting length and or
boost level by pressing the arrows or boost button on the touch screen.
• Please note that the motor will only run when the 3 position slide switch is set
to lock, the last position (furthest down). This is to ensure the cutting length
does not adjust whilst you are cutting your hair.
• Press and hold the battery icon to display the remaining battery time in
minutes on the digital display. This can be used only when the 3 position slide
switch is set in the middle position.
,
CAUTION
• NOTE: The comb must be attached to the appliance in order to use the hair
length selector.
,
Before starting the cut
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
,
TO ATTACH A COMB
• Hold the comb with its teeth upward.
• Guide the comb rails into the slots on the side of the clipper head. Then push
the comb down until it seats on the adjustment arm.
,
TO REMOVE THE COMB
• Holding the clipper with the blades facing away from you, firmly push the
comb upward and away from the blades.
,
CAUTION
• If the incorrect comb is attached to the product for the desired cutting length,
a red warning light will illuminate to indicate this.
• Please inspect that the desired comb is attached or that the correct setting is
selected on the comb switch.
,
INSTRUCTIONS FOR CUTTING HAIR
• For even cutting, allow the comb attachment/blade to cut its way through the
hair. Do not force it through quickly. If you are cutting for the first time, start
with the maximum comb attachment.
ENGLISH
Summary of Contents for HC5960
Page 1: ...HC5960 Touch Control Lithium Hair Clipper ...
Page 169: ...169 ...
Page 170: ...170 ...
Page 171: ...171 ...