Clipper cutters do not move:
■
The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintaining section.
■
Always clean the blade and clipper before storing.
■
Always place the blade protection guard back on the clipper blades before
storing.
Clipper does not hold charge:
■
Fully discharge battery by running clipper until it stops, then follow recharging
instructions (see section on charging your hair clipper).
U.S. residents: To order accessories, contact us at 800-392-6544, visit us at
RemingtonProducts.com, or visit your local retailer.
Canadian residents: To order accessories, please call 800-268-0425 or visit us at
RemingtonProducts.com.
Cleaning & Maintaining Your Clipper
After each use:
■
Brush the accumulated hair from the cutters.
■
Rinse blade.
Rinsing your blades
- Turn clipper on and rinse blades under running water.
- Turn off clipper and detach blades. Rinse the inside of the blades.
- Ensure all loose hairs are removed from the blades.
- Once blades are cleaned, ensure the blades and unit are thoroughly
wiped dry.
Caution:
Do not rinse when clipper is plugged in.
■
Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Every Six Months
■
At regular intervals the blade set should be removed and cleaned.
■
Brush out hairs from between the blades with soft cleaning brush. Do not
remove the lubricating grease on the plastic components. It is not necessary
to remove the small moving blade from the unit.
■
Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Cleaning Cautions:
■
Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
cutter casing.
■
Unplug the clipper from the power outlet when not in use and when cleaning.
Storage
■
Always store this appliance and cord in a moisture-free area.
■
Do not wrap the cord around the appliance.
■
Do not store in temperatures above 140ºF.
Blades
■
It is recommended to oil the blades after every use.
■
Place 2 to 3 drops of lubricating oil on the moving blade and turn on the
clipper. The oil should distribute on its own. Wipe off any excess oils.
Clipper does not work when turned on:
■
Clipper must be charged for a full 3-5 hours.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within
30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 in the US or 800-268-0425 in
Canada.
Remington Guarantees Satisfaction After 60 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1.
Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2.
The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men’s Shave and Groom
product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3.
In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4.
Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5.
Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6.
No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7.
Please allow 4-6 weeks to receive your refund by check.
Limited Five Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for the life of the product. This warranty does not
include damage to the product resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product with your name, address and day
time phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more information call 800-736-4648 in the US or
800-268-0425 in Canada.
Warranty excludes:
■
The blades and storage case are not included in the limited five year warranty.
This warranty does not cover products damaged by the following:
■
Accident, misuse, abuse or alteration of the product
■
Servicing by unauthorized persons
■
Use with unauthorized accessories
■
Connecting it to incorrect current and voltage
■
Wrapping cord around appliance causing premature wear & breakage
■
Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance
of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO THE LIFE OF THE PRODUCT.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Warranty
Questions or comments:
Call 800-736-4648 in the US
or 800-268-0425 in
Canada or visit
RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by:
Spectrum Brands Canada Inc.
131 Saramia Crescent
Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 3/15 10953-01
Made in China.
T22-0002597
Contains a listed adaptor.
Charging Your Hair Clipper
■
Clipper must be turned off.
■
Insert the adapter plug into the bottom of the clipper and plug the adapter unit
into a power outlet. The indicator light will blink to indicate that it is charging.
The indicator light will turn off when the clipper is fully charged.
■
The clipper will be fully charged in 3-5 hours. A full charge provides 60
minutes of cordless use.
■
The batteries cannot be overcharged, but we recommend that charging be
discontinued if the clipper will not be used for a long period of time.
■
If the clipper has not been used for a month or longer, it is advisable to
recharge it for 3-5 hours.
■
To preserve the life of the batteries, discharge them by running the clipper
until the blades stop. Switch off and fully recharge. Do this every
six months.
■
Charge the clipper at temperatures between 40º-90ºF.
■
Lithium Ion batteries included. See battery removal section for
proper disposal of batteries.
How to Use
Battery
Battery Removal
When your rechargeable clipper reaches the end of its useful life, the batteries
must be removed and recycled or disposed of properly in accordance with your
local and state requirements.
The following should be followed for battery removal:
■
Ensure device is unplugged from any electrical outlet and discharged of all
power.
■
Remove blade for ease of disassembly and safety by following instructions for
blade removal (see section Removable Blade).
■
Lift or pry the deco plate on the lower portion of the clipper and unscrew 2
screws located on the back housing of the clipper.
■
Remove 6 screws of inner housing to expose batteries.
■
Lift or pry the cover plate on the bottom of the battery chamber.
■
Remove the 2 batteries and printed circuit board assembly from the battery
chamber.
■
Cut the tabs on both ends of the battery and remove it from the printed circuit
board.
■
The battery is to be disposed of safely.
Note:
This clipper is not intended for professional use.
Cleaning & Maintenance
Troubleshooting
