![background image](http://html.mh-extra.com/html/remington/hc5155/hc5155_manual_1437855004.webp)
4
PARTS
1. On / Off Switch
2. Blade set
3. 2 attachment guide combs
4. Charging indicator light
5. Power port
Not shown:
6. Adaptor
GETTING STARTED
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the first time, charge for 14-16 hours.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• The charging indicator will illuminate.
• The charging indicator will remain illuminated after the battery is fully charged.
• Your clipper cannot be overcharged. However, if the product is not going to be used for
an extended period of time (2-3 months), unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• To preserve the life of your batteries, let them run out every 6 months then recharge for
16-20 hours.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• Allow 14-16 hours for a full charge.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When the cord is connected to the mains, a charging LED light is displayed on the
hairclipper.
• The charging LED light will turn off when the unit is switched on.
CAUTION
Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the unit is switched on and fully charged, the product can be used in cordless
mode for up to 30 minutes.
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
ENGLISH