![background image](http://html1.mh-extra.com/html/remington/flexibrush-steam-cb4n/flexibrush-steam-cb4n_user-manual_1438226003.webp)
Thank you for buying your new Remington
®
product. Before use, please read these
instructions carefully and keep them in a safe place for future reference.
PRoducT FEATuRES
A
Reservoir: Unscrew and fill with water, then press to activate steam
b
Bristle Lock Guard: When removed enables bristles to be slid on or off barrel.
When in place it acts as a guard and locks bristles into place
c
Heat Resistant Bristles: Two sets of soft, removable bristles that remain cool to touch
d
On indicator light
e
Curl Release: Depressing the button allows free rotation of the barrel
f
Heel Rest: Prevents any part of the heated barrel from touching surface area when
resting
g
Swivel Cord
h
Multivoltage: For use at home or abroad
The unit will automatically convert from 220/240v to 120 volts
2 year guarantee
INSTRucTIoNS FoR uSE
Before use make sure hair is clean, dry and tangle free.
Remington Flexibrush can be used without steam. When steam is required first fill the water
reservoir.
Hold the unit in a vertical position with cap end down to prevent any spillage from any residual
water left in the cap.
Unscrew the reservoir and fill with warm or cool water to the fill line. Replace the cap with
the tong still held vertically with cap end down and twist gently into place.
Plug the unit into the mains and wait for about 5 minutes.
To activate steam, gently depress the cap. The unit is designed to release with one push, just
the right amount of steam required for a small section of hair.
Separate the section of hair to be curled and wrap around the hot barrel, winding up exactly
as you would use a roller.
Press reservoir cap to release the steam. Hold the Flexibrush in place for about 8-12 seconds
– then press the curl release button and carefully draw the unit away allowing hair to unwind
automatically. Let curls spring back and cool before combing.
To change the bristles, the unit must be unplugged and cool. Unscrew the Bristle Lock Guard
(B) and slide the bristles off the barrel. Taking the other set of bristles, gently glide each row
into a groove on the barrel and push into place. Screw the lock guard securely back into place.
1
ENGLISH
120 - 240V
MULTI VOLTAGE
Flexibrush Steam
A
B
C
D
E
F
G
H
E
C
A
CB4N_INT_IFU_17_01_08 18.03.2008 21:32 Seite 2
090168 REM IFU CB4N_UK.indd 1
26.03.09 19:24