Remington BHT2000A, Instructions Manual

Page: 8 / 136

8
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Ensure the clipper is discharged of all power and disconnected from the
mains.
• Remove the trimmer head or shaver head.
• Unscrew 1 screw located on the back housing of the trimmer.
• Lift or pry the clipper halves apart, exposing the inner housing.
• Unscrew 2 screws located on the inner housing.
• Remove the inner housing, lift or pry the inner housing to upper and lower
part.
• Remove the battery and printed circuit board assembly from the lower part.
• Cut the tabs on both ends of the battery and remove from the printed
circuit board.
• The battery is to be disposed of safely.
H
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
ENGLISH