Remington BHT2000A, Instructions Manual

Page: 5 / 136

5
ENGLISH
,
ADJUSTING THE TRIM LENGTH (Diagram A)
The trimmer comb can be adjusted to give you 5 different trim lengths
simply by turning the Zoom wheel to the desired setting. Turn the Zoom
wheel clockwise for shorter length, anticlockwise for longer length. The
wheel will click into place as it reaches each setting, and the setting
number will appear on the length position indicator.
, NOTE: Trimmer comb must be attached to the product in order to use the
hair length selector.
, TRIMMING
1 Use the zoom wheel to set the trimmer comb to the desired length setting.
2 The setting will appear on the length position indicator. If you are
trimming for the first time start with the maximum trimming length
setting (5).
3 Turn the unit on.
4 Place the flat top of the trimmer comb against the skin.
5 Slowly slide the trimmer through the hair, in the direction of the growth.
6 If hair builds up in the guide comb during the trimming process, switch the
unit off, pull off the guide comb and brush trimmer / rinse comb.
7 For a closer and precise shaping, remove the adjustable trimmer comb and
trim the hairs along the outer edge.
8 When you finish, turn the product off, clean, and return it to its storage
pouch.
, EDGING AND SHAPING (Diagram C)
9 Remove the Trimmer Comb Attachment.
10 Hold the Trimmer at a right angle to your skin and press down gently.
11 Edge and shape the area as desired.
, USING THE SHAVER ATTACHMENT (Diagram D)
12 Hold the shaving head to your skin.
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
HUN
PL
RU
TR
RO
GR
SL
AE
HR
Setting Length
1 3mm
2 5mm
3 7mm
4 8mm
5 12mm