![background image](http://html.mh-extra.com/html/remington/bht-600/bht-600_manual_1437183005.webp)
ENGLISH
3
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
PL
HU
N
RU
TR
RO
GR
SL
AE
HE
HR/ SRB
GB
Remove the Trimmer Comb Attachment which will leave you with just the Trimmer.
Hold the Trimmer at a right angle to your skin and press down gently.
Edge and shape the area as desired.
USING THE BODY HAIR TRIMMER HEAD (Diagram D)
Attach Body Hair trimmer attachment head
To achieve the desired hair length, change the guide comb by easily sliding it onto one of the
three slots on the attachment head.
Place the flat top of the trimmer comb against the skin
Slowly slide the trimmer through the hair, in the direction of hair growth.
Use slow and well-controlled movements.
If hair builds up in the guide comb during the trimming process, switch the unit off, pull off
the guide comb. Brush trimmer / rinse comb
USING THE SHAVER ATTACHMENT (Diagram E)
Hold the shaving head perpendicular to your skin’s surface.
Stretch your skin with your free hand so hairs stand upright.
Only apply light pressure on the shaving head while shaving.
Shave against hair growth.
The Microscreen foil shaver head with circular foil holes are developed to give a controlled
close cut.
After shaving, remove the Microscreen foil by pressing the release buttons to expose and
clean the shaver cutters.
USING THE EXTENDABLE HANDLE (Diagram F)
Press the release bottom located on the top middle of the trimmer body.
The extendable handle will slide out and click into place.
With the extended handle you can reach all areas of your body.
CARE FOR YOUR TRIMMER
Care for your product to ensure a long lasting performance. We recommend you clean your
shaver after each use. The easiest and the most hygienic way to clean the shaver is by rinsing
the product head after use with warm water. Always keep the trimmer in the “off” position
when not in use.
AFTER EACH USE
Turn Trimmer off.
Remove the adjustable trimmer comb and cutter assembly or shaver attachment.
Gently tap on a flat surface to remove hair particles, and brush the remaining hairs away/
rinse under warm water (Diagram G).
CLEANING CAUTIONS
080781_REM_IFU_BHT600_22L.indd GB_3
080781_REM_IFU_BHT600_22L.indd GB_3
05.11.2008 18:02:39 Uhr
05.11.2008 18:02:39 Uhr