6
TROUBLESHOOTING
If the trimmer does not work when turned on:
• Check that the batteries have been installed correctly. Trimmer will not operate
if batteries are incorrectly installed.
• If the battery power has been depleted, replace with 2 `AAA’ Alkaline batteries.
If trimmer cutters do not move:
• The cutting unit may be dirty and clogged. Clean the unit as directed in the
Cleaning and Maintaining section.
CLEANING AND MAINTAINING YOUR TRIMMER
Your trimmer is fitted with high quality hardened steel cutting blades that are
permanently lubricated. Cleaning should be done only with a soft brush, such as
the brush supplied with the unit. Clean your trimmer regularly to ensure that the
unit’s operating life is not shortened.
• Do not apply pressure or hard objects to the cutters.
• Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on
the unit’s body.
WEEKLY
• Trimmer should always be shut off.
• Remove trimmer comb attachment from trimmer. Shake or blow out any
accumulated hairs.
• Remove the blade cutter assembly, by pushing upward on the top of the cutter
assembly. The blade cartridge will slide up.
• Blow or use the brush provided to sweep any accumulated hair from the back
of the cutter. You can now rinse the cutter assembly under the tap with cool or
warm water (never use hot water).
Note: The cutter assembly can only be rinsed with water once it is removed
from the main trimmer.
Do not rinse the trimmer body – it is not watertight.
Do not use any liquid cleaners or harsh chemicals. Do not disassemble the
cutter set.
The trimmer blades are permanently lubricated. If you do rinse the
attachment with cool or warm water (never use hot water) then it will need
to be re-lubricated with light-grade oil or sewing machine oil (1-2 drops over
the cutters).
This product is not suitable for use in the bath or shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
