www.remingtonengines.com
Chapter 3 Diesel Engine Safety Operation Specification
1-
The operator should read the Maintenance Manual and know well about the structure,
operation and maintenance.
2-
One who is not familiar with the operation instructions is not allowed to operate the
engine.
3-
The engine is not permitted to be started unless all preparation work for the engine
starting has been done.
4-
Attention to the fire protection at the engine running, the fuel tank should be provide
a fire prevention device.
5-
While the engine is operating, it is not permitted to be dismantled, checked and
adjusted.
6-
Emergency stop the engine at oil pressure lower even falls to zero, or with abnormal
sound inside while engine running.
7-
Once the engine overspeeds suddenly due to out of control, push the stop lever
immediately to stop the engine, then check the cause and remedy the fault. If the stop
lever is out of order, push down the decompression lever or block up the air inlet port
to stop the engine.
8-
The circuit system should be overhauled by the professional electrician or one knows
well electricity knowledge.
9-
The engine should be used in ventilation area to prevent the waste gas pollute the
working environment.
