www.remingtonengines.com
should have bigger bendy semi diameter, to avoid big pressure of exhaust and reduce
engine output.
5.
Inlet pipe of the seawater should on the lowest position of the ship cabin, and should
install a filter to avoid absorb impurity. Inlet pipe should with check valve, to avoid
6.
Seawater pump is not installed on the marine engine directly, user can install it in the
cabin according pump
’
s direction of rotation . Please note when install it, the pump
can be adjusted from left to right position , also can adjust the flexibility of the
transmission belt .
Storage and Preservation
If the engine will not be used in a long period, should store and preserve it according
following method:
1.
First drain out fuel, oil and cooling water from the engine.
1.
Demount the injector , put 200G dehydrated clean oil to each cylinder , turn
crankshaft to make oil on every part surface symmetrically, then install the injector
and fixed it well .
2.
Warp up the air filter with plastic film, dismantle the silencer and plug up the exhaust
hole with wooden plug.
3.
Wipe off the dirty oil
、
dust and rust from the surface of the engine , smear the
unpainted parts surface with thin layer of anti-rusting grease, then cover it with clean
paper . Finally pack the engine with plastic bag.
4.
The preserved engine should be stored in well ventilated, dry and clean place, it is
strictly forbidden to be putted together with corrosive substances.
The effective period of this method is 3 months, when the time exceeds the period,
please repeat this procedure.
