HARD- WIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified
person should service and repair this electr
If it is necessary to hard-wire this appliance, a qualified electrician must remove the
cord connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with
if hard-wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
CODE in the United States.
13
WIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified
person should service and repair this electric appliance.
wire this appliance, a qualified electrician must remove the
cord connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with
wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
Turn off the appliance completely and let cool before servicing. Only a qualified service
wire this appliance, a qualified electrician must remove the
cord connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes,
wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
2.
Cut off the copper head of the wiring and leave 1 cm (0.4 inch) uncovered wiring.
1. Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.
Summary of Contents for WM-50-XS
Page 21: ...21 EXPLODED VIEW...
Page 24: ...24...
