10. Press the
key to confirm the value.
11. Press the
h
key multiple times to go back to the main display.
5.3
Carrying out an auto-detect
Carry out an auto-detect after removing or replacing an (optional) control
PCB.
1. Navigate to the Installer menu.
2. Press the
key to open the menu.
3. Keep pressing the key until the code
is displayed.
4. Press the
key to confirm opening the menu.
5. Keep pressing the key until the device is displayed.
6. Press the
key to confirm the selection.
7. Keep pressing the key until
is displayed.
8. Press the
key to carry out the auto-detect.
9. After a while, the main display is shown; auto-detect is complete.
5.4
Restoring to factory settings
1. Navigate to the Installer menu.
2. Press the
key to open the menu.
Fig.70
Step 10
MW-3000338-01
Fig.71
Step 11
MW-3000316-01
Fig.72
Step 2
MW-3000312-01
Fig.73
Step 3
MW-3000313-01
Fig.74
Step 4
MW-3000314-01
Fig.75
Step 5
MW-3000406-02
Fig.76
Step 6
MW-3000407-01
Fig.77
Step 7
MW-3000412-01
Fig.78
Step 8
MW-3000413-01
Fig.79
Step 2
MW-3000312-01
5 Installer instructions
18
7698983 - v.02 - 17102018
