1. Press the two keys
f
simultaneously and then key
[+]
until the
symbol
?
flashes on the menu bar.
2. Select the installers menu using the key
S
.
c0de
appears
on the display.
3. Use keys
[-]
or
[+]
to input the installer code
0012
.
4. Confirm using key
S
.
p[1
is displayed with
1
flashing.
5. Press the
[+]
key to go to parameter
p[17
.
6. Confirm using key
S
.
7. Use the
[+]
key to increase the speed of rotation from
46
to
50
, for example.
8. Confirm the value with the
S
key.
9. Press the
>
key 2 times to return to the current operating
mode.
6.7.4.
Return to the factory settings Reset Param
1. Press the two keys
f
simultaneously and then key
[+]
until the
symbol
?
flashes on the menu bar.
2. Select the installers menu using the key
S
.
c0de
appears
on the display.
3. Use keys
[-]
or
[+]
to input the installer code
0012
.
4. Confirm using key
S
.
p[1
is displayed with
1
flashing.
5. Press the
[+]
key several times.
p[df
is displayed with
df
flashing.
6. Press the
S
key.
df[x
is displayed with
x
flashing. This is
the current value of X for dF. Check this against the value of X on
the type plate.
7. Enter the value of X shown on the type plate using the
[-]
or
[+]
key.
8. Confirm the value with the
S
key,
df[y
is displayed with
y
flashing. This is the current value of Y for dU. Check this against
the value of Y on the type plate.
9. Enter the value of Y shown on the type plate using the
[-]
or
[+]
key.
10.Confirm the value with the
j
key. The factory settings are reset.
11.The display returns to the current operating mode.
T001628-A
3x
...x
...x
2x
T000820-H
3x
...x
6. Commissioning
CALORA TOWER GAS 15S EX CALORA TOWER GAS 25S EX
CALORA TOWER GAS 35S EX
74
22/04/2016 - 300026141-001-07
