Remed ELPIS-2, User Manual, Page: 42 / 45

ELPIS-4 / 3 / 2 User Guide
2017.08.21 Ver M-1.0.0
42/45
- Keep out of water
- Keep away from direct sunlight
- Do not store near heaters
- Avoid locations subject to excessive shock or vibration, exposure to chemicals or
explosive gases .
11.4 Troubleshooting
If the equipment does not operate normally during use, please check the items listed
in the table below before requesting service. If none of the following problems apply,
or if the following remedies do not help, turn off the power to the equipment and contact
the REMED Customer Service Center.
Symptom What to do
References in the
User Guide
Equipment
does not turn
on.
Check if the power connector of the
equipment is properly connected.
3.4.2
Check if the power switch of
equipment is turned on.
4.1.2
No heat output
from the unit.
Please check that you have connected
Monopolar Pencil, Bipolar Forceps, etc
correctly.
6.1
Try adjusting the sound from the menu
6.4.3
Increasing the
output strength
does not increase
the output.
Be sure to adjust the output of the set
function.
6.3