ELPIS-4 / 3 / 2 User Guide
2017.08.21 Ver M-1.0.0
28/45
Cut
Pure Cut is used for
hemostasis.
Incision and hemostasis are possible at the same
time. As Blend 1 → Blend 3, the deepening of the
bleeding effect occurs, while the incision is slow.
[Figure 16] Monopolar cut function
Coag
It is suitable for tissues in small areas in such a way that
solidification takes place when the electrode is in contact with
the tissue site.
It is a non-contact solidification type with low heat penetration
strength, and is suitable for areas where it is difficult to solidify
in a wide area tissue or contact type.
[Figure 17] Monopolar coag function
(1) Handswitching
A. Cut mode
①
Select the desired function using the Mode button of Mono Cut on the machine control
panel.
②
Connect the Patient Plate to the Patient Plate connection on the front of the unit
(see Figure 13).
Summary of Contents for ELPIS-2
Page 1: ......