Reloop sPodcaster, Instruction Manual

Page: 6 / 16

ENGLISH
Congratulations on purchasing your Reloop Studio sPodcaster. Thank you for placing your trust in our tech-
nology. Before operating this equipment we ask you to carefully study and observe all instructions.
Please remove the Reloop Studio sPodcaster from its packaging. Check before initial operation to make sure that the
device has not been visibly damaged during transport. If you detect any damage to the cable, do not operate the device.
Contact your specialised dealer.
For reasons of safety and approval (CE) the personal reconstruction and/or modification of these products are prohibited.
Please observe that damage caused by modifications performed manually to this device is not covered by the implied
warranty.
These products leave our works in a perfect condition. Please observe all notes in these operating instructions to warrant
this condition and the safe operation of the products!
Any damage caused as a result of the non-compliance with these operating instructions leads to the expiration of any
implied warranty claim. The manufacturer does not accept liability for any damage to property or for personal injury
resulting from the improper handling of the products, or non-observance of the operating instructions.
If used for any purpose other than described in these operating instructions, the products may suffer damage and the
implied warranty expires. Also, any other use is linked with risks such as short circuits, fire, electrical shock, etc.
note:
In case of return consignment please only use the original packaging to protect the unit against transport
damage. Transport damage that occurs due to improper packaging can lead to expiration of warranty rights.
The manufacturer is not liable for any transport damages that occur due to improper packaging during
return consignment to the seller. Similar costs are at the expense of the sender!
OPERATInG EnVIROnMEnT
- The products must be operated and stored in a dry environment only! Splash water, rain, humidity, fog may cause
serious damage. The limit value for relative humidity is 50% at 45°C.
- The products must be operated at a temperature range of between -5 °C and 45 °C only. Protect the products
against direct exposure to sunlight or other heat, such as from radiators!
- If the products are taken from a cold environment into a warm environment they must only be taken into operation
once they have reached ambient temperature, since the condensation created by the difference in temperature may
destroy the products!
- Protect the products against dust!
APPLICATIOn In ACCORDAnCE WITH REGuLATIOnS
- This device is a condenser microphone with one-sided directional pattern.
- This microphone is designed specifically for applications in recording surroundings (vocal recordings), television and
radio studios.
- The Reloop Studio sPodcaster has to be connected to a PC or Mac via USB cable and does not necessitate a sepa-
rate power supply.
- If the device is used for any other purposes than those described in the operation manual, damage can be caused
to the product, leading to the exclusion of implied warranty rights. Moreover, any other application that does not
comply with the specified purpose harbours risks such as short circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the implied warranty rights.