1.4
Attach the wire quick connectors (D) to the
reverse light positive wire and negative wire
separately. Ensure the wire sits well in the
metal slot of the connector. Snap the cap of
the connector over and use a clamp to
squeeze the cap to ensure solid connection.
Attach the quick connectors (female
end) of the main cable (C) with the
quick connectors (D) on the reverse
light wire. Ensure positive wire
connect with positive wire and
negative wire with negative wire.
1.5
C
D
D
Shift the gear to “P” position and turn the car
ignition switch to “Lock” position.
Before you start the next step, we suggest you simply connect the camera (B) and the
monitor (A) with the main cable (C) and then test whether the backup camera system
works well. Please refer to the following illustration. When you turn the ignition
switch to “ON” and shift the gear to “R” , the monitor should show the backup image
clearly. Then you can continue the next step. Otherwise, please go back to Step 1 and
check the connections between the reverse light and the main cable (C).
11
1 877 466 8191
Installation
