RELM RMV8125, Instruction Manual

Page: 9 / 14

9 10
Buttons Function Description Buttons Function Description
Press this button to trigger this function and the
CTCSS, DCS, and 2Tone/DTMF signaling will be
closed, so you can receive the signal that can't be
heard in the normal operation. Press this button
again to return to the normal operation. Press this
button in the selective call state to quit such a state.
Hold this button to open the squelch. Loosen this
button to return to the normal operation. Press this
button in the selective call state to quit such a state.
Press this button to open squelch, press it again to
return to normal operation.Press the button in the
selective call state to quit such a state
Press the top button which programmed as
Emergency Alarm, the emergency tone could be
18.Monitor/Call
Cancel
19.Squelch off
momentary/
Call Cancel
20.Squelch off/
Call Cancel
21.Emergency
Alarm
sent as the set in program software, and also the
identity and background sound could be sent to your
partners and system.
Sends the DTMF/2Tone code assigned to call 1 key.
Sends the DTMF/2Tone code assigned to call 2 key.
Sends the DTMF/2Tone code assigned to call 3 key.
Sends the DTMF/2Tone code assigned to call 4 key.
To enter the menu mode or make menu selections.
Enables Lone worker function
22.Call Button 1
23.Call Button 2
24.Call Button 3
25.Call Button 4
26.Menu Select
/Enter
27.Lone worker
Press the button, the backlight could be chosen
among light for long time, dark for long time, and light
automatically.
Monitor/ Hook Detection: select the Hook or Desk Mic Monitor
function.
28.Scan List Edit
29.Backlight
Select
Press this button, the radio will enter the fast menu
mode for scan list edit. For details, see
“
Menu
Operation
”
.
B. Press / button until RADIOCAL .
C. Press button to select
“
SEL CALL
”
.
D. Press / button until the required call list appears.
E. Press
“
PTT
”
button to send the selective call.
F. Press
“
PTT
”
button and speak to the microphone in normal
voice. Please keep the microphone about 3 to 4 cm far from your
mouth. After speaking, please loosen the
“
PTT
”
.
G. Press button to return to the previous operation.
5.2 Receive Selective Call
Receiving a selective call, you will hear the alert tone and the LED
A. Press
“
Menu Select/Enter
”
button to enter the menu mode.
“ ”
5. Radio Call
5.1 Send Selective Call
P
1
P
3