4
Installation
Please read the user’s manual carefully before performing the installation.
The power consumption of the display is approximately 270 watts.
Please use the power cord designated for the product. When an extension cord is
required, use one with the correct power rating. The cord must be grounded and
the grounding feature must not be defeated.
The product should be installed on a flat surface to avoid tipping. Space should be
maintained between the back of the product and the wall for proper ventilation. If
you would like to mount the monitor to the wall, please see page 6, for additional
information.
Please ensure the product is installed with the screen in landscape orientation.
Any 90° clockwise or counterclockwise installation may induce poor ventilation
and successive component damage.
Important Safety Guidelines
This product is designed and manufactured to operate within defined design limits,
and misuse may result in electric shock or fire.
To prevent the product from being damaged, the following rules should be
observed for the installation, use and maintenance of the product. Read the
following safety instructions before operating the display. Keep these instructions
in a safe place for future reference.
z
To avoid the risk of electric shock or component damage, switch off the power
before connecting other components to the LCD monitor.
z
Unplug the power cord before cleaning the LCD monitor. A damp cloth is
sufficient for cleaning the LCD monitor. Do not use a liquid or a spray cleaner
for cleaning the product. Do not use abrasive cleaners.
z
Always use the accessories recommended by the manufacturer to insure
compatibility.
z
When moving the LCD monitor from an area of low temperature to an area of
high temperature, condensation may form on the housing.
z
Do not place the LCD monitor on an unstable cart, stand, or table. If the LCD
monitor falls, it can injure a person and cause serious damage to the appliance.
Use only a cart or stand recommended by the manufacturer or sold with the
LCD monitor.
z
Any heat source should maintain a distance of at least 5 feet away from the
LCD monitor, i.e. radiator, heater, oven, amplifier etc. Do not install the product
too close to anything that produces smoke or moisture. Operating the product
close to smoke or moisture may cause fire or electric shock.
z
Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the LCD monitor and to protect it
from overheating, be sure these openings are not blocked or covered.
z
Never push any object into the slot on the LCD monitor cabinet. Do not place
any objects on the top of the product. It could short circuit parts causing a fire
