Reliance electric 57C409, Instruction Manual

Page: 40 / 44

EĆ2
16 Bit Register Reference
Use the following method to reference a 16 bit register as a unit. Analog input
data, update period, interrupt control, and filter selection registers are typically
referenced this way. The symbolic name of each register should be as meaningul
as possible:
nnnnn IODEF SYMBOLIC_NAME%[ SLOT=s, REGISTER=r]
Bit Reference
Use the following method to reference individual bits on the module. Common
clock status and control bits are typically referenced this way. The symbolic name
of each bit should be as meaningful as possible:
nnnnn IODEF SYMBOLIC_NAME@[ SLOT=s, REGISTER=r,
BIT=b]
where:
nnnnn Ć BASIC statement number. This number may range from 1Ć32767.
SYMBOLIC_NAME% Ć A symbolic name chosen by the user and ending with (%).
This indicates an integer data type and all references will access register r".
SYMBOLIC_NAME@ Ć A symbolic name chosen by the user and ending with (@).
This indicates a boolean data type and all references will access bit number b"
in register r".
SLOT Ć Slot number that the module is plugged into. This number may range
from 0Ć15.
REGISTER Ć Specifies the register that is being referenced. This number may
range from 0Ć10.
BIT Ć Used with boolean data types only. Specifies the bit in the register that is
being referenced. This number may range from 0Ć15.
Examples of Local I/O Definitions
The following statement assigns the symbolic name POSITION% to register 0 of
the input module located in slot 4:
1020 IODEF POSITION%[ SLOT=4, REGISTER=0]
The following statement assigns the symbolic name
CCLK ON@ to bit 8 of register 4 on the input module located in slot 7:
2050 IODEF CCLK ON@[ SLOT=7, REGISTER=4, BIT=8]