8
WARNING
HYDRAULIC POWER SUPPLY
TURN HYDRAULIC SOURCE OFF
before making any connection
DO NOT attempt to make any changes
to any of the component
parts or accessories when connected to the power source.
DO NOT adjust, inspect, or clean any tool
while the tool is connected
to the power source. The tool could accidentally start up and cause
serious injury.
DO NOT lock the tool in the On Position.
In an emergency, serious
damage or injury could occur during the time required to stop the tool.
SAFE OPERATION & CARE
USE THIS TOOL FOR ITS INTENDED PURPOSE ONLY
Any other use can result in injury or property damage.
INSPECT TOOL BEFORE USE.
Replace any worn, damaged
or missing parts. A damaged or improperly assembled tool may
malfunction, injuring operator and/or nearby personnel.
INSPECT HYDRAULIC HOSES AND COUPLINGS
before each
use. Repair or replace if any cracking, leakage, wear or damage is
found. Worn or damaged hoses may fail resulting in personal injury
or property damage.
CLEAR WORK AREA
of all bystanders and unnecessary personnel
before operating this tool.
KEEP ALL PARTS OF THE BODY AWAY FROM MOVING PARTS.
Failure to observe this warning could result in serious injury.
D A N G E R
OIL INJECTION INJURY
Hydraulic oil or
fl
uid under the skin is a serious injury. Oil under
pressure can penetrate the skin and may cause dismemberment
or loss of life. Seek medical assistance immediately if such an
injury should occur.
Always wear safety gloves, eye protection and all required safety
equipment when operating or handling this tool.
DO NOT use fingers or hands to attempt to locate a leak.
DO NOT handle hoses or couplers while system is pressurized.
NEVER open or service the system before depressurizing.
WARNING
