background image

Bulletin 254
May 2019

Page 7 of 7

www.reliablesprinkler.com

Guarantee

For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms, 
and conditions, visit www.reliablesprinkler.com.

Patents

Patent Pending (Model NS-ASAM)

Ordering Information

Specify the following when ordering.

        

Model NS-ASAM

  

        

Model NS-Pak

 

        

Nitrogen Maintenance Device

 

Pressure Switch Kit: None, UL Listed, ULC Listed

Maintenance

The owner is responsible for maintaining all parts of the fire pro-
tection system in proper operating condition. Any system main-
tenance or testing that involves placing a system component out 
of service may eliminate the fire protection that is provided by the 
fire protection system.

The Reliable Model NS-ASAM, NS-Pak, and Nitrogen Regulator 
shall periodically be given a thorough inspection and test. NFPA 
25, “Inspection, Testing, and Maintenance of Water Based Fire 
Protection Systems,” provides minimum maintenance require-
ments. System components shall be tested, operated, cleaned 
and inspected at least annually and parts replaced as required.

Caution

The transportation, handling, installation, and restraint of 
high-pressure cylinders must be performed in accordance with 
local, state, and federal standards.

Summary of Contents for NS-ASAM








Reviews: