![Reliable F1FR40 Bulletin Download Page 4](http://html1.mh-extra.com/html/reliable/f1fr40/f1fr40_bulletin_1436011004.webp)
Standard Finishes
Special Application Finishes
Sprinkler
F1, F2 and FP
(3)
Escutcheons
Sprinkler
F1, F2 and FP
(3)
Escutcheons
Bronze
Brass
Electroless Nickel PTFE
Bright Brass
Chrome Plated
Chrome Plated
Bright Brass
(4)
Black Plated
White Polyester
White Polyester
Black Plated
Black Paint
Black Paint
Off White
Off White
Chrome Dull
Chrome Dull
Notes:
1. Other finishes and colors are available on special order. Consult your Reliable sales representative for details.
2. Paint or any other coating applied over the factory finish will void all approvals and warranties.
3. The Model FP assembly consists of a sprinkler mounted in a galvanized steel cup with a finished trim ring.
4. For 200°F (93°C) maximum temperature rated sprinklers only.
Sprinkler and Escutcheon Finishes
(1)(2)
Table B
Maintenance
Reliable Model F1FR series sprinklers should be inspected
and the sprinkler system maintained in accordance with NFPA
25, as well as the requirements of any Authorities Having
Jurisdiction.
Prior to installation, sprinklers should remain in the original
cartons and packaging until used. This will minimize the
potential for damage to sprinklers that could cause improper
operation or non-operation.
Do not clean sprinklers with soap and water, ammonia
liquid or any other cleaning fluids. Remove dust by gentle
vacuuming without touching the sprinkler.
Replace any sprinkler which has been painted (other than
factory applied). A stock of spare sprinklers should be
maintained to allow quick replacement of damaged or
operated sprinklers. Failure to properly maintain sprinklers
may result in inadvertent operation or non-operation during a
fire event.
Guarantee
For the guarantee, terms, and conditions, visit www.
reliablesprinkler.com.
Ordering Information
F1FR40 Ordering Information
Specify the following when ordering:
• Deflector/Orientation
Pendent
Pendent - FP
• Temperature Rating
• Sprinkler Finish
See Table B
• Recessed Escutcheon*
F1
F2
FP
• Escutcheon Finish
See Table B
• Sprinkler Wrench
Model W-2 (pendent)
Model W-4 (recessed pendent)
*Note:
286°F (141°C) sprinklers are not listed to be used
recessed.
P/N 9999970607
Bulletin 183
October 2020
Page 4 of 4
www.reliablesprinkler.com