10
TROUBLESHOOTING
%POPUPQFSBUFUIFTUFBNDMFBOFSXJUIBEBNBHFEDPSEQMVHPSJGUIFTUFBNDMFBOFS
IBTCFFOESPQQFEPSEBNBHFE5PBWPJESJTLPGFMFDUSJDTIPDLEPOPUEJTBTTFNCMF
or attempt to repair the unit on your own. Return the unit to Reliable Corporation
TFFXBSSBOUZGPSFYBNJOBUJPOSFQBJSPSSFQMBDFNFOU
PROBLEM
No steam is released through
the steam fittings.
%SPQTPGXBUFSMFBLGSPNUIF
attachments.
%JSUZXBUFSJTDPNJOHPVU
Not enough steam pressure.
Pump is not stopping.
REMEDY
1. Turn steam unit onto the
2nd position.
2. Put required amount of
XBUFSJOUPUBOL
3. Plug unit into outlet.
8BJUGPSMJHIU UPUVSOPO
8BJUGPSMJHIU UPUVSOPO
-FUXBUFSSVOUISPVHITZT
-
tem until steam comes out.
'PMMPXDMFBOJOHJOTUSVDUJPOT
JOCPPL
1. Turn the dial until the de-
sired pressure is reached.
1. Press the switch on the
steam handle. Hold for a few
seconds until the pump is
primed.
POSSIBLE CAUSES
1. Steam unit is not turned on.
8BUFSUBOLJTFNQUZ
6OJUJTOPUQMVHHFEJO
(FOFSBUPSJTOPUGVMMZ
heated.
6OJUJTOPUGVMMZIFBUFE
2. Condensation was created
from non-use.
1. Scale may have built up.
1. The dial on the handle may
be set too low.
"OBJS CVCCMFNBZCFJO
the pump.
