Reliable Automatic Sprinkler Co., Inc.
(800) 431-1588
Sales Offices
(800) 848-6051
Sales Fax
(914) 829-2042
Corporate Offices
www.reliablesprinkler.com Internet Address
Manufactured by
Recycled
Paper
Revision lines indicate updated or new data.
EG. Printed in U.S.A. 09/21
P/N 9999970486
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory Mutual
Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Products manufactured and distributed by Reliable have been protecting life and property for almost 100 years.
Ordering Information
Specify:
1.
Sprinkler: Model DH80 Dry
2.
Escutcheon/Cover Plate Model: [Standard escutcheon]
[Model HB extended escutcheon][Model FP recessed
escutcheon][Model SWC cover plate]
3.
Sprinkler Temperature Rating: [155°F (68°C)][175°F
(79°C)][200°F (93°C)]
4.
Sprinkler threads: [1” NPT][ISO7-1R1]
5.
Sprinkler inlet: [Standard][Short “PL” - wet-pipe
installation only]
6.
Sprinkler/Escutcheon Finish: See Finishes table
7.
Cover Plate Finish (where applicable): See Finishes table
8.
Length: “A” Dimension (face of tee to finished face of
wall in 1/4” (6 mm) increments up to a maximum of 36”
(900 mm)- See Fig. 4-7)
Note:
The “A” dimension is based on a nominally gauged
pipe thread “make-up” of 0.600” (15 mm) per ANSI B2.1
(approx. 7-1/2 threads).
Installation Wrench
Model F3R Sprinkler Wrench (Standard and HB escutcheons)
Model XLO2 Sprinkler Wrench (FP Recessed and SWC
Concealed)
