10
OPERATION
Read entire manual prior to using this tool. Refer to all safety cautions and warnings.
Observe all safety precautions and procedures required by the operating company .
(Also refer to SAFETY information found on pages 5 through 10)
1.
Before cutting, ensure that subject is within the capacity listed for the tool. (see page 4)
2.
Connect
to a 10,000 psi power source with an audible “Pop Of f” type relief valve.
(Recommended for best operation) (Refer to page 8 UNIT/HOSE CONNECTION)
Ensure movable blade has retracted completely.
3.
Tool head rotates to aid in proper alignment.
4.
Place subject between cutting blades.
5.
Position subject at a 90
O
angle to the tool head and cutting blade.
NOTE:
Failure to cut subect at the proper 90
O
angle may result in tool damage.
7.
Turn power source “ON” and activate control valve to advance movable blade
up to subject.
Check tool alignment.
8.
Continue to advance until cut is complete.
9.
Return source to the “OFF” position and allow movable blade to retract completely
.
SCISSOR TYPE
CUTTING HEAD
10,000 PSI
COUPLER
JACK TYPE
BLADE ADVANCE
Do not cut live conductors.
Hardened metals may
fl
y when severed.
Take necessary precautions. wear safety glasses.
Keep all body parts away from cutting blades and moving parts.
WARNING
Failure to follow these rules can result in serious personal injury or death.
REL-954RC
Simple Design
Superior Performance