background image

6

WARNING

BEFORE USING THIS TOOL, READ THE WARNINGS 

and  the  recommended  practices  described  in  this  manual. 
Failure  by  the  operator  to  read  and  fully  understand  these 
warnings  will  leave  this  person  unqualified  to  use  and 
operate  this  tool.  Property  damage,  severe  personal  injury, 
and/or  death  could  result  by  not  following  these  warnings.

Eye Protection

These warnings will appear in appropriate locations when they are pertinent to the 
particular subject being shown. Read each one carefully and follow them strictly.

WARNING

Always  wear  eye  protection  to  avoid 
injury  from  flying  debris  or  hydraulic 
oil leaks. Failure to do so can result in 
serious personal injury.

Hard Hat

WARNING

Always wear a hard hat to avoid injury 

from falling debris. Failure to do so 

can result in serious personal injury.

Hearing

Protection

WARNING

Always wear hearing protection, 

to avoid hearing loss due to long 

term exposure to high noise levels.

Foot 

Protection 

WARNING

Always wear foot protection.

Failure to do so can result in serious 

personal injury.

Dust Mask

WARNING

Always wear a dust mask. Failure 

to observe this warning may result 

in serious health issues and/or 

breathing dif

fi

 culty.

WARNING

Protective 

Gloves 

Always wear protective gloves

Failure to do so can result in serious 

personal injury.

Summary of Contents for REL-GR-9























Reviews: