background image

9

GENERAL SAFETY

GENERAL SAFETY

GENERAL SAFETY

GENERAL SAFETY

GENERAL SAFETY

FAILURE TO HEED THESE WARNINGS COULD RESULT IN

PROPERTY DAMAGE, SERIOUS PERSONAL INJURY OR DEATH.

USE ALL APPROPRIATE AND APPLICABLE PERSONAL SAFETY EQUIPMENT

as required by the operating company.

INSPECT TOOL BEFORE USE. Replace any worn, damaged or missing parts. A damaged
or improperly assembled tool may injure operator and/or nearby personnel.

KEEP ALL PARTS OF THE BODY AWAY

 from moving parts of the tool.

KEEP HANDS OUT FROM BETWEEN CUTTING BLADES AT TOOL HEAD.

ALL BODY PARTS SHOULD BE OUTSIDE DANGER ZONE PRIOR TO CUTTING.

MAKE SURE 

there is no person in close proximity to you or the tool who could be

injured by any operation being performed, tool malfunction or flying debris.

DO NOT OVEREXTEND

 your position by overreaching or unbalancing the footing

necessary to maintain physical control of your body and the tool.

ALWAYS MAINTAIN 

a firm grip on the tool to avoid loss of control during an operation,

causing property damage, serious injury or death.

USE THIS TOOL FOR THE MANUFACTURERS’ INTENDED PURPOSE ONLY.

OBSERVE CLOSELY ALL OF THE SAFETY RULES FOR A PARTICULAR JOB CLASS

Operation/Safety

 methods may vary in accordance with the working guidelines

established by each utility or contractor. Ensure that you fully comply with all safe
operation guidelines required by your employer.

Summary of Contents for REL-58RH















Reviews: